miter saw or circular saw – for cutting your wood planks to the correct lengths. small foam paint roller and paint brush.white paint (or the paint color of your choice).spackling and caulk – for filling any tiny gaps and nail holes for a perfect finish.1″x2″ poplar or pine boards to create a nice thick facing for each shelf (amount depends on size of your closet and shelves).1″x2″ pine boards to create the side shelf supports (two 14” pieces for each shelf).Another option is to use 12″ MDF shelf boards if you want to avoid having to rip your MDF down to the correct width. A sheet of MDF cut into 14” strips – My cubbies are 14” deep but you can use whatever measurement works best for you based on your closet size.Click here to see my full disclosure policy. This post contains affiliate links which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more. I chose it because it was quite a bit cheaper, but I also love that it is easy to cut and the surface is incredibly smooth. I built the rest of the shelves using MDF. This was actually my first time using MDF instead of plywood and it was perfect. To keep things simple, I reinstalled the same shelf and curtain rod that were there previously higher in the closet. Once the design was decided, I got to work on my DIY closet shelves!įirst step, remove everything that was already in the closet including the closet rod, shelf, and shelf supports that were there before. I patched up the nail holes with spackle and then gave the whole closet including trim a fresh coat of white paint. And I also gave the sliding closet doors a major makeover in the process.) ( Update – Since sharing this post, I’ve also given our tiny master closet an update as well with a more grown-up closet organizer. The boys won’t be able to reach the clothes that are hanging on the bar for quite some time, but almost none of their everyday clothing needs to be hung up, so that wasn’t a deal breaker. In the end I decided the design on the far right above was the winner. There were plenty of low shelves/cubbies for storing all kinds of stuff, a long hanging bar, and a high shelf above it to put absolutely all of the vertical space to good use. I came up with a few ideas and then used painters tape to see how they would actually work in the closet. On the other hand, I also wanted it to continue to function several years down the road when they are a bit older so the area for hanging clothes had to be big enough to fit full grown man clothing.Īlso, since this is a closet with sliding doors, you can only access one half of the closet at a time. So whatever built-ins I created needed to make sense with only one door open at a time. and my two and four year olds needed to be able to reach as many of the shelves as possible. (I definitely want to encourage them getting out and putting away their own clothing!) It needed to have lots of shelf space for storing toys, shoes, clothes, etc. When I started figuring out the design, I tried to keep several things in mind. That way I could configure it exactly how I want – plus it would be way cheaper! I knew I wanted to create my own custom closet system. Not a great closet for anyone, but considering how few hanging clothes my son has, it was basically just one huge waste of space! One bar for hanging clothes and one high shelf. Plus a small bookcase I stuck in there to add a bit more storage.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |